MIMAKI JFX-1631/1615 Plus, Operation Manual

Page: 49 / 154

Registering the thickness of the media
3-5
3
Use
ful Functi
o
n
Measuring the thickness of the media automatically
Thickness of media is automatically measured with the gap pin on the left of the carriage.
1
Set a media.
2
Press the key in the local mode.
3
Select the [HEAD HEIGHT] by pressing the or
key.
4
Press the key.
5
Select the [THICKNESS CHECK] by pressing the or
key.
6
Press the key.
• In preparation for the measuring, the Y-bar will move up to the top
position.
• The carriage will move to the drawing area.
7
Press the key.
• The media thickness will be measured automatically.
• The measured thickness will be displayed.
• The carriage will move to the evacuation position and the screen
returns to the one displayed in Step 4.
8
Press the key several times to end the setting.
• Be sure to set a media on the drawing area. If measured automatically without media, the
head can break.
F UNC T I ON
V I EW
< EN T >
FUNCTION
F UNC T I ON
H E A D H E I GH T < EN T >
H E A D H E I GH T
MED I A T H I CK NE S S < e n t >
ENTER
H E A D H E I GH T
T H I CKN E S S CHEC K < e n t >
T H I CKN E S S CHEC K
MOV I NG NOW
T H I CKN E S S CHEC K
CHE CK S T A R T : e n t
ENTER
T H I CKN E S S CHEC K
* * CHE CK I NG * *
T H I CKN E S S CHEC K
3 . 0 mm : e n t
H E A D H E I GH T
MED I A T H I CK NE S S < e n t >
ENTER
END