MIMAKI JFX-1631/1615 Plus, Operation Manual

Page: 13 / 154

xii
For safe operation
Precautions for use
CAUTION
Protection against dust Periodic exchange parts
• It is strongly recommended to use the device in
a room that is not dusty.
Set the Refresh level 2 or 3 when in bad
environment.
• When leaving the workshop after the working
hours, be sure to take off any media from the roll
hanger.If any media is left on the roll hanger,
dust can put on it.
• Store media in a bag.Wiping off dust
accumulated on a media will adversely affect
the media due to static electricity.
• Dust in the head will also cause drops of ink to
fall abruptly down on the media during printing.If
this phenomenon takes place, be sure to clean
up the head. (
P.2-8)
• There are some parts which must be replaced
by service men.You have to make a contract
with distributors or dealers for after-sale service.
Adjusting the level
• The level must be adjusted before printing can
start.
Handling of maintenance liquid
• Be sure to store the maintenance liquid in a cold
and dark place.Store the maintenance liquid in a
place that is out of the reach of children.
Ink cartridges
• If the ink cartridge is moved from a cold place to
a warm place, leave it in the room temperature
for three hours or more before using it.
• Open the ink cartridge just before installing it in
the printer.If it is opened and left for an extended
period of time, normal printing performance of
the printer may not be ensured.
• Make sure to store ink cartridges in a cold and
dark place.
• Be sure to thoroughly consume the ink in the ink
cartridge after opened.If an extended period of
time has passed away after opening the
cartridge tank, printing quality would be poor.
• You cannot use any other ink type than the
exclusive one. If you use any other ink type, it
may cause the damage for the device. To repair
of the device is your responsibility as used
instead the exclusive one.
• Never refill the ink cartridge with ink.
• Neither pound the ink cartridge nor shake it
violently so as to prevent leakage of ink
adhering locations.
Warning labels Handling the Anti-freezing liquid
• This device is adhered with a warning label.Be
sure understand firmly the warnings given on
the labels.In the case where any of the warning
label has become so soiled that the warning
message is illegible or has come off, purchase a
new one from your local distributor or our office.
Refer to Appendix for the label
• Be sure to store the Anti-freezing liquid in a cold
and dark place.
• Store the Anti-freezing liquid in a place that is
out of the reach of children.