2-11
2
Basic Operation
s
Drawing an image from source data
Starting the drawing operation
1
Set the media (
P.2-5)
(1)
Open/Close the suction valve adjusting to the media size.
(2)
Pressing the
key, put on the VACUUM lamp.
(3)
Pressing the
key, absorb the media.
2
Press the
key in the local mode.
• The device goes in the remote mode and data from the computer
can be received.
3
Transmit data to be drawn from the computer
• Drawing conditions are displayed.
• As for the data transmission method, see the instruction manual
of the output software.
4
Start drawing
• The drawing origin is not changed after completion of the drawing.
• If the UV irradiation device is not ready or the temperature of the water heating system has not reached
the predetermined value, a message is displayed. Drawing is not allowed in such cases. When the
display is disappeared, drawing can be started.
• Data transmission is allowed even if both errors are displayed. Drawing is started after the display is
disappeared.
VACUUM/BLOW
ON/OFF
* REMOT E *
2 . 5 mm
REMOTE
* REMOT E *
6 0 0 X 6 0 0
HOS T / 4 P / B / N
2 . 5 mm
Resolution: 600DPI
Pass
Priority is set to “HOST” :
“HOST” is displayed.
Priority is set to “PLOT” :
Print quality (STD/FINE/FASR) is
displayed.
Direction:
“B” denotes bi-directional.
“U” denotes uni-directional.
Scanning speed:
“N” denotes normal.
“x2” denotes the
double speed.
Summary of Contents for JFX-1631/1615 Plus
