manualshive.com logo in svg

MIMAKI JFX-1631/1615 Plus, Operation Manual

Share
Download
MIMAKI JFX-1631/1615 Plus Operation Manual Download Page 24

1-6

Connecting the cables

Connecting the USB2.0 interface cable 

Connect a computer to this machine with the USB2.0 interface cable.

Connecting the power cable

• Prepare the USB2.0 interface cable. (USB2.0 interface cable is not supplied with this machine.)
• Your RIP is required to support USB2.0 interface.
• If USB2.0 interface is not installed in your computer, ask a RIP maker near you or our branch office.

• For supplying power to the device, the power distribution board work is required.
• Connecting the power cable cannot be installed by the customer.
• Contact your local distributor or call for service to connect the power cable as well as moving installation 

of the device.

• We should take no responsibility for any troubles caused through the power cable connection by the 

customer without calling for service.

USB cable

Summary of Contents for JFX-1631/1615 Plus



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands