MIMAKI JFX-1631/1615 Plus, Operation Manual

Page: 118 / 154

4-36
Checking UV ink curing level
As the UV LED is deteriorated, the ink curing level may be lowered.
Check the UV ink curing level and adjust the UV LED light intensity, if necessary.
1
Set media for drawing patterning on the table.
• Turn the vacuum switch ON. After that, set the drawing origin.
2
Make sure that the local mode is displayed.
3
Press the key.
4
Select [HARDEN CHK] by pressing the or
keys.
5
Press the key.
6
Select resolution by pressing the or keys.
• Setting value: 600x300 dpi,600x600 dpi,600x1200 dpi,
1200x300 dpi,1200x600 dpi,1200x1200 dpi
7
Press the key.
8
Select drawing quality by pressing the or
keys.
• Setting value : STANDRD, FINE, FAST
9
Press the key.
10
Select the scanning direction pressing or
keys.
•
Setting value
: BI-D , UNI-D
T E S T DRAW
NOZ Z L E CHK < EN T >
TEST
T E S T DRAW
H ARDEN CHK < EN T >
H ARDEN CHEC K
D P I :
3 0 0 X 3 0 0
ENTER
H ARDEN CHEC K
D P I : 1 2 0 0 X 1 2 0 0
H ARDEN CHEC K
QA L I T Y : S T ANDRD
ENTER
H ARDEN CHEC K
QA L I T Y : F I NE
H ARDEN CHEC K
S CA N D I R :
B I - D
ENTER
H ARDEN CHEC K
S CA N D I R : UN I - D