MIMAKI CJV30-100BS, Operation Manual

Page: 249 / 296

7-9
Warning/Error Messages
7
Tr
ouble
shooting
Message Cause Solution
COPY SKIP
A register mark cannot be detected during
continuous copying. (One pattern is skipped.)
There is no problem if the marks are successfully
detected after skipping one pattern.
If marks cannot be detected continuously by five
patterns or more, [ERROR 36-C MARK
DETECT] (
P.7-12) is displayed.
MEDIA SKEW <ENT> Sheet misalignment exceeds the setting length
of skew check (
P.4-14).
Set the sheet again and press the
key.
PAUSE REM/END
The plotter is holding the register mark detecting
operation, since the
key has been
pressed during the detection process.
Press the key to resume the mark
detection.
Or press the
key to end the operation.
MEDIA EXCHANGE
The machine is waiting for the medium to be
replaced during continuous copying in the leaf
media mode. Replace the leaf sheet (cut sheet) with a new
one, and resume continuous copying.
MEDIA END REM/END
End of the medium is detected while detecting a
register mark or cutting roll medium. Cutting cannot be continued, since roll medium
has ended.
Press the
key and replace it with new
medium.
The medium is lifted. Fix the lifting of the sheet and press the
key to resume cutting.
The back of the machine is exposed to intense
light. Turn the machine around so as not to exposed it
to the light, and press the
key to
resume cutting.