MIMAKI CJV30-100BS, Operation Manual

Page: 224 / 296

6-30
Setting Regular Operations
Various regular operations are performed with the power ON to prevent problems, such as ink coagulation, from
occurring (Regular settings). For the regular settings, the following items can be set:
z Default value
Set Item Set Value Overview
ROUTINE WIPING
SCAN COUNT 0 to 9,990 times
When the set number of times scanning is performed has been
reached during a printing operation, the nozzle face is wiped
and dew condensation is removed.
TEMP.
Difference
0 ~ 60°C
When the difference between the set temperature of the print
heater and the ambient temperature has exceeded a specified
temperature during a printing operation, the nozzle face is wiped
and dew condensation is removed.
REFRESH
OFF/1 to 168
hours
The interval between each refreshing operation is set.
PUMP TUBE WASH
The interval between each PUMP tube washing operation is set.
CLEANING
The interval between each cleaning operation is set.
Ink Type Refreshing PUMP Tube Washing Cleaning
BS
*
4 hours 48 hours OFF
• When the message on the right is displayed, the operations other
than [ROUTINE WIPING] in the regular settings are not performed.
Perform the operations described on P.6-39 as necessary.
• When you turn off the power switch on the front side of the machine,
check the state of the waste ink tank.
• Even if [!RTN] is displayed, the connection unit automatically
switches to the printer unit and starts the regular operation
when the machine is left unused for a certain period of time.
< LOCA L . 1 > [ # 0 1 ]
! WAS T E T ANK
< LOCA L . C > ! RTN [ # 0 1 ]
CUT 1 ( 3 0 / 6 0 / 0 . 3 0 )