MIMAKI CJV30-100BS, Operation Manual

Page: 107 / 296

3-31
3
Ex
tended F
unctions
– Printer –
Machine Settings
Common settings are functions for using this machine easily.
The following items can be set in Machine settings.
Setting the DEODORIZE FAN
The exhaust fan operates during printing. After printing has been complete, it operates according to the setting of
"Stop timer".
The following two items can be set for the exhaust fan.
• STOP TIME : The time until the exhaust fan stops after printing has been completed is set.
• RENEW : When this is set to "ON", the exhaust fan can operate while printing is not performed.
1
Press the key in LOCAL to select the
printing mode.
2
Press the key.
3
Press to select [MACHINE SETUP].
4
Press the key twice.
5
Press to select an item to set.
STOP TIME : The time until the exhaust fan stops after printing has been completed is set.
RENEW : Select this when you want to operate the exhaust fan.
Item
Set Value
*1
*1. The underlined has been set as default.
Overview
DEODRIZE
SETUP
*2
*2. The exhaust fan is optional.
STOP
TIME
OFF /
10 to 120 to 240 min/
CONTINUE
The time until the rotation of the exhaust fan stops after printing has been
completed is set. (
P. 3-31)
RENEW ON/OFF The present operating state of the exhaust fan is switched. ( P. 3-31)
DRYNESS FEED ON/OFF
It is set whether a medium is fed for it to be dried after printing has been
completed. (
P. 3-32)
STAMP SETUP ON/OFF
The setting for the output date and printing conditions to be output after
printing has been completed is configured. (
P. 3-33)
Waste Ink Warning ON/OFF
It is set whether the confirmation message of the waste ink tank is
displayed. (
P. 6-41)
Test PRT. Arrange
FEED DIR./
SCAN DIR. The orientation of test patterns when test printing has been repeated is
set. (
P. 3-34)
600cc Cartridge
*3
*3. It is not displayed when the 600cc cartridge is not set in the ink slot.
Setting the weight of an eco-case. ( P. 3-34)
CART.PRIORITY
INK LEVEL
EXP. DATE Setting a cartridge to be used first for double cartridge automatic change
function.
ENV. TEMP.
*4
*4. This function is available for the firmware Ver.2.30 and later.
Not wait ARR.
Wait arrival Sets the operation when an error indicating that the ambient temperature
is out of the usable temperature range occurs. (
P. 3-47)
• The exhaust fan is an option contained in the drying exhaust unit.
• When this machine is equipped with a drying fan, the fan operates in cooperation with the settings
configured here.
< LOCA L . 1 > [ # 0 1 ]
WI DTH : * * * * mm
FUNCT I ON
SE TUP
< ENT >
FUNCT I ON
MACH I NE SE TUP < ENT >
DEODR I Z E F AN
S TOP T I ME
< e n t >