MIMAKI CJV30-100 Operating Manual Download Page 41 | Manualshive

Page: 41 / 274

background image

Turning the Power ON/OFF

2-9

2

Bas

ic Operations

Turning the Power OFF

When having ended the operation of the machine, turn the power OFF by pressing the power switch located on
the front side.
Check the following items when turning the power OFF.

• If the machine is receiving data from the PC or if there is any data that has not been output yet
• If the head has returned to the capping station
• If any error has occurred (

P.7-10 "Error Messages")

1

Turn OFF the power of the connected PC.

2

Press the power switch to turn the power OFF.

• The power switch blinks in green.
• Do not turn OFF the main power switch located on the side of

the machine.

• To use this machine again, light the green lamp by pressing the

power switch.

• When the conjunct unit is connected to the cutter unit, after

being connected to the printer unit, the power turns OFF.

Cautions about Turning the Power OFF

z

Do not turn the main power switch OFF.

When the main power switch is ON, the power periodically turns ON and the nozzle clogging prevention
function (flushing function) operates.
When the main power switch has been turned OFF, the sleep functions, such as flushing, do not operate,
and this may cause nozzle clogging.

z

Turn the power OFF after having checked the position of the print unit.

If the power is turned OFF in a state where the print unit has not returned to the capping station, the ink
head dries, which may cause nozzle clogging.
In this case, turn the power ON again and check that the print unit has returned to the capping station, and
then turn the power OFF.

z

Do not turn the power OFF during printing or cutting.

The head may not return to the capping station.

z

After having turned the power switch OFF, turn the main power switch OFF.

When turning the main power switch OFF in order to move this machine to another place or to deal with an
error in the machine, be sure to press the power switch on the front side, check that the power is turned
OFF, and turn the main power switch OFF.

Power switch

«
...
39
40
41
42
43
...
»

Summary of Contents for CJV30-100



















































































































































































































































































Reviews:

No comments

Related manuals for CJV30-100

Brand: Roland Pages: 6

Brand: Roland Pages: 38

Brand: Furuno Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands