MIMAKI CJV30-100, Operating Manual

Page: 118 / 274

4-8
The Size of a Register Mark Suited for the Distance between the Marks
The size (B) of a register mark suited for the distance (A) between the marks is as shown below.
If the mark size (B) is too small relative to the distance (A), the marks may not be detected correctly. Be sure to
prepare the register marks with an appropriate size.
(mm)
Distance between Register Marks for Copied Designs
For Type 1 register marks, the distance between the marks must be not shorter than two times the mark length
and not longer than 1,000 mm. For Type 2 register marks, the distance between the marks must be not shorter
than the mark length and not longer than 1,000 mm.
A 200 or less 500 1000 2000 3,000 or more
B 4 ~ 8 ~ 15 ~ 25 ~ 35 ~
Register mark: Type Register mark: Type 2
Distance between register
marks =
Between mark length (a) x2
and 1,000 mm Distance between register
marks =
Between mark length (a)
and 1,000 mm
50 to 3,000 mm