MIMAKI CJV30-100, Operating Manual

Page: 199 / 274

6-25
Preventing Nozzle Clogging When the Power Is OFF
6 6
Mai
ntenanc
e
Setting the Tube Washing Interval in the Sleep Mode
The interval between each operation of washing the cap and PUMP tube with cleaning solution for maintenance
in the sleep mode is set.
1
Press the key in LOCAL to select the
printing mode.
2
Select [SLEEP SETUP] of the maintenance menu.
(1) Press the key.
(2) Press to select [MAINTENANCE] and press the key.
(3) Press to select [SLEEP SETUP].
(4) Press the key.
3
Press to select [PUMP TUBE WASH].
4
Press the key.
5
Press to set the interval between each tube
washing operation.
• Set value: OFF or 1 to 168 hours
6
Press the key.
7
Press the key several times to end the setting.
• When the machine has not been filled with cleaning solution, the
screen on the right appears in Step 5. Fill the machine with
cleaning solution (
P.6-10) and perform the operations in Step 1
and later.
• If the cleaning solution is not set, it does not work.* Set the
cleaning solution.
*
For [!Wash Liquid END], it works to use up the cleaning solution, however, replace early.
< LOCA L . 1 > [ # 0 1 ]
WI DTH : * * * * mm
S L EEP SE TUP
PUMP TUBE WASH < e n t >
S L EEP SE TUP
WASH I NT ERVA L = 1 h
S L EEP SE TUP
WASH I NT ERVA L = 4 h
S L EEP SE TUP
PUMP TUBE WASH < e n t >
* * Wa s h i n g L i q u i d * *
< LOCA L . C > ! WSH [ # 0 1 ]
CUT 1 ( 3 0 / 6 0 / 0 . 3 0 )
< LOCA L . 1 > [ # 0 1 ]
! Wa s h L i q u i d C a r t . NONE
or