Milwaukee M18 FAC, User Manual

Page: 18 / 56

18
English 18
TECHNICAL DATA M18 FAC
Power input 22 A
Rated input 400 W
Approximate cut-in or cut-out pressure 7.2 bar (105 psi) / 9.3 bar (135 psi)
Air tank capacity 7.6 L
Maximum air pressure 135 psi, 9.31 bar
Regulated pressure rating 0–135 psi, 0–9.31 bar
Pressure gauge 1 pc, Ø 40 mm
Free air delivery 48 L/min at 2.8 bar
Maximum rotational shaft speed 2000 min -1
Quick connect type 1/4” Nitto
Battery voltage 18 V
Weight (without battery) 14 kg
Weight to according to EPTA-Procedure 01/2014 (4.0 Ah) 14.43 – 15.49 kg
Recommended ambient operating temperature 5 – 40 °C
Recommended battery types M18 HB..., M18B...
Recommended charger M12-18..., M18 DFC
Noise information
Noise emission values determined according to EN 1012
Sound pressure level (Uncertainty K = 3 dB(A)) 68 dB (A)
Sound power level (Uncertainty K = 3 dB(A)) 79 dB (A)
Always wear ear protectors!
WARNING Read all safety warnings, instructions,
illustrations and speci fi cations provided with this power
tool. Failure to follow all instructions listed below may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
AIR COMPRESSOR SAFETY WARNINGS
Know your air compressor. Read the operator’s manual
carefully. Learn applications and limitations of the product, as
well as the speci
fi c potential hazards related to the product.
Following this rule reduces the risk of electric shock, fi re, or
serious injury.
Drain the tanks of moisture after use. If the product will not
be used for a while, leave the drain valve open until the product
is to be used. This allows moisture to completely drain out and
helps prevent corrosion on the inside of the tanks.
Risk of fi re or explosion. Do not spray fl ammable liquid in a
con fi ned area. The spray area must be well-ventilated. Do not
smoke while spraying or spray where spark or fl ame is present.
Risk of bursting. Do not adjust regulator to result in the output
pressure being greater than the marked maximum pressure of
attachment. Do not use at pressure greater than 9.3 bar (135
psi).
To reduce the risk of electric shock, do not expose the
product to rain. Store the product indoors.
Inspect the tanks yearly for rust, pin holes, or other
imperfections that could cause it to become unsafe. Never
weld or drill holes in the air tanks.
Make sure that the hose is free of obstructions or snags.
Entangled or snarled hoses can cause loss of balance or
footing and may become damaged.
Use the air compressor only for its intended use. Do not
alter or modify the product from the original design or function.
Always be aware that misuse and improper handling of the
product can cause injury to yourself and others.
Never leave a product unattended with the air hose
attached.
Never point any air tool towards yourself or others.
Do not operate the air compressor if it does not contain a
legible warning label.
Do not continue to use a tool or hose that leaks air or does
not function properly.
Always disconnect the air supply, turn the unit o
ff , and
remove the battery pack before making adjustments,
servicing a product, or when a product is not in use.
Do not attempt to pull or carry the air compressor by the
hose.
Your tool may require more air consumption than the air
compressor is capable of providing.
Always follow all safety rules recommended by the
manufacturer of your air tool, in addition to all the safety
rules for the air compressor.
Following this rule reduces the
risk of serious personal injury.