manualshive.com logo in svg

Milltronics Mercap MCP01 D series, Instruction Manual

Share
Download
Milltronics Mercap MCP01 D series Instruction Manual Download Page 12

Page 10

MERCAP – INSTRUCTION MANUAL

7ML19981CM01.1

Examples of Mercap Level Instruments

The following graphics illustrate the variation in configurations available for the Standard
series, Level and Interface series, and Sanitary series Mercap level instrument.

Note

: All measurements are given in millimeters/inches.

Standard Level Version (Mercap MCP01)

This is the most common version of Mercap and is available with the following features:

•

 

Threaded flanges, welded flanges, and solid flanges

•

 

S series, D series, SD series, DD series, and HP series process seals.

•

 

Selections of standard ANSI and DIN flanges are available

•

 

The most common electrode is insulated with PFA, but  Enamel (HP seal) is also
available as standard (Enamel is only available on rigid design).

•

 

Various process connection materials are also available

•

 

Rigid and Flexible Cable versions available

MCP01 (Standard) S-Series: Threaded Versions

                                         S-Series: Threaded

Active Shield

Insertion

175

(6.9”)

Insertion

Length

Active

Length

∅

16 (0.63”)

or 

∅

24 (0.94")

∅

160

(6.3”)

   40 (1.57")

Inactive Tip

Summary of Contents for Mercap MCP01 D series
































































Reviews:

No comments

Brands by name

Popular brands

Load more brands