Page
3
of
33
Place a second 608 bearing on top of the v-wheel. Press the bearing into
the v-wheel using your impromptu tool. Pinch the inner races of both
bearings with your fingers and test that the v-wheel spins freely. Repeat
this process with the remaining v-wheel bodies. Set the v-wheels to the
side.
Gantry End Plates
Parts
Left Gantry End Plate
Right Gantry End Plate
X/Y Motor Mount (2)
Assembled V-Wheel (4)
Hardware
M4x12 Machine Screw (4)
M4 Split lock Washer (4)
V-Wheel Kit
•
M8x40 Machine Screw (4)
•
M8 Nylock (4)
•
Eccentric Spacer (4)
Tools
Phillips-Head Screwdriver
Needle Nose Pliers
13mm Socket or Wrench
