Page
21
of
33
Mega V Y Rails
Parts
2650 Mega V Rail (2)
Drag Chain Mount (3)
Hardware
M5x25 Button Cap Screw (4)
M5x12 Button Cap Screw (9)
M5 Split lock Washer (13)
5/16x3/4 Button Cap Screw (16)
Drop-in T Nut (13)
Tools
3mm Hex Key
3/16 Hex Key
Square
Designate one side of the machine as the front. On the top of the right 2650 6060
frame rail, insert (9) drop-in t nuts in the outside slot. Locate the (3) drag chain
mounts. Using (9) M5x12 button cap screws with M5 split lock washers, attach the
drag chain mounts to the 2650 frame rail with the slots pointing towards the front
of the machine. Slide one drag chain mount to the front of the machine and the
other two to the back of the machine.
Loosen the (4) 5/16x3/4 button cap screws on each of the Y end plates. Locate the right Mega V Y rail (with
the drag chain mount installed). Place between the right Y end plate, with the rack on the outside of the rail
and the rack teeth pointing out, and secure with (4) 5/16x3/4 button cap screws (pictured at top). Repeat the
process with the other end of the Y end plate. While tightening the 5/16x3/4 button cap screws, check for
