Page
11
of
33
Z Motor
Parts
4750mm Motor w/Coupler
Hardware
6.35mm Spacer (4)
M4x16 Machine Screw (4)
Tools
Phillips-Head Screwdriver
2.5mm Hex Key
Locate the 4750mm Motor with coupler. Place 6.35mm spacers (4) on the
mounting holes of the Z motor mount. Place the 4750mm motor with the motor
wire positioned to the back of the X/Z assembly, opposite of the router mount, onto
the spacers. Secure with (4) M4x16 machine screws.
Using a 2mm hex key, tighten the bottom screw of the coupler. This will
connect the coupler to the lead screw. Make sure the lead screw is fully
engaged with UHMW screw seat and apply light downward pressure. Place
the X/Z assembly to the side.
