Milkotronic LACTOSCAN SA, Operation Manual

Page: 51 / 110

Ultrasonic milk analyser
Operation manual 11.04.19 51/110
With button Set – to confirm the ASCII symbol, shown on the display and
passes to editing the next symbol from the calibration name.
With button
Next – to show the next ASCII symbol.
After editing the last (eighth) name symbol, the display shows:
Cal1: Sheep
User Edited
Name:MilkShp
Exit Save
There are the following possibilities:
With button
Exit – to leave the menu.
With button Save – to confirm already edited calibration name and to save it in
the device. The program returns to the beginning of the menu for setting
calibration names.
7.2.3.5. Set Base FrPnt
Through this menu you have the possibility to enter the basic freezing point
separately for each calibration. For more information, see
Appendix Freezing
point. After choosing the menu the following is displayed:
Edit FrPoints
FrPoint Calibr1
FrPoint Calibr2
FrPoint Calibr3
-----------------------------
Exit
After choosing freezing point for the calibration, the following is displayed:
FrPoint Calibrx
-0.fff
- OK +
Where:
Calibrx - basic freezing point to be edited for chosen calibration;
-0.fff - basic freezing point current value;