Miele WWI 860 Operating Instructions Manual Download Page 59

Page: 59 / 108

Changing the programme sequence

Changing the programme

It is not possible to change the
programme, the temperature, the spin
speed or the selected Extras after the
programme has started.

Cancelling a programme

You can cancel a programme at any
time after it has started.



Turn the programme selector to the



position.



Turn the programme selector to the

Cottons

programme.

The following will appear in the display:

Cancel?









Yes



Touch the

sensor.

The suds will be pumped away. The
following will appear in the display:

Prog. cancelled













Wait until the



symbol in the display

goes out and the door unlocks.



Pull open the door.



Remove the laundry.

Selecting a new programme



Close the door.



Turn the programme selector to the
required programme.



Check that there is still detergent in
the dispenser drawer. Add more
detergent if necessary.



Touch the

Start

Add laundry

sensor.

Interrupting a programme



Turn the programme selector to the



position.

The washing machine switches off.



To continue: Turn the programme
selector to the position of the wash
programme that was started.

Cancel?









Yes



Touch the



sensor.

The following will appear in the display:

Cancel?











Confirm with the

sensor.

Useful tip:



Cannot be changed

appears in the display, the programme
selector is in the incorrect position.

Summary of Contents for WWI 860













































































































Search results

Summary of Contents for WWI 860

Reviews:

Related manuals for WWI 860

Brands by name

Popular brands

Miele WWI 860, Operating Instructions Manual

Search results

Summary of Contents for WWI 860

Reviews:

Related manuals for WWI 860

Brands by name

Popular brands