Miele WWI 860 Operating Instructions Manual Download Page 39

Page: 39 / 108

6. Starting the programme

Starting a programme



Touch the flashing

Start

Add laundry

sensor.

The door will lock and the programme
will start.

The programme status will appear in
the display.

The washing machine will keep you
updated on the programme status and
the time remaining for the programme
to run.

If a Delay start period has been
selected, this will appear in the display.

Energy savings

After 10 minutes the indicators will dim.
The

Start

Add laundry

sensor flashes

slowly.

You can reactivate the indicators:



Touch the

Start

Add laundry

sensor

(this does not have any effect on a
running programme).

Adding laundry during a
programme sequence

Laundry can be added or removed at
any time, provided that the



symbol

is not illuminated in the display.



Touch the

Start

Add laundry

sensor.

The following appears in the display:



Please wait



Wait until the following display lights
up:



Door can be opened



Open the door and add or remove
laundry.



Close the door.



Touch the

Start

Add laundry

sensor.

The wash programme will continue.

Laundry cannot be added or removed
if:

– The suds temperature is above 55°C

– The water inside the drum is above a

certain level

Summary of Contents for WWI 860













































































































Search results

Summary of Contents for WWI 860

Reviews:

Related manuals for WWI 860

Brands by name

Popular brands

Miele WWI 860, Operating Instructions Manual

Search results

Summary of Contents for WWI 860

Reviews:

Related manuals for WWI 860

Brands by name

Popular brands