Warning and Safety instructions
10
In the event of a fault or for cleaning purposes, the washing
machine is only completely isolated from the electricity supply when:
– it is switched off at the wall socket and the plug is withdrawn, or
– it is switched off at the mains circuit breaker.
The machine must only be connected to the on-site water supply
using a new hose kit. Old hose kits must not be re-used. Check the
condition of the hoses regularly so that you can replace them in
good time and avoid the risk of any water damage.
The water flow pressure must be at least 100 kPa and must not
exceed 1000 kPa.
This washing machine must not be installed and operated in
mobile installations (e.g. on a ship).
Do not make any alterations to the machine, unless authorised to
do so by Miele.
In areas which may be subject to infestation by cockroaches or
other vermin, pay particular attention to keeping the machine and its
surroundings in a clean condition at all times. Any damage which
may be caused by cockroaches or other vermin will not be covered
by the machine warranty.
