Settings
101
Anti-crease
The Anti-crease function helps prevent
creasing if laundry is not going to be
removed immediately after the end of
the programme.
The drum continues to turn at intervals
for up to 30 minutes at the end of the
programme. The washing machine door
can be unlocked at any time by
touching the
Start
/
Add laundry
sensor
and then opened.
Anti-crease is activated as standard.
Miele@home
Control the networking of your
washing machine with your Wi-Fi
network.
The following points may appear in the
submenu:
Set up
This message only appears if the
washing machine has not yet been
connected to a Wi-Fi network.
Please refer to "Before using for the first
time" for instructions on how to set up
the connection.
Deactivate
(visible if Miele@home is
activated)
Miele@home remains set up, the Wi-Fi
function is switched off.
Activate
(visible if Miele@home is
deactivated)
The Wi-Fi function is reactivated.
Connection status
(visible if Miele@home
is activated)
The following values are displayed:
– the quality of the Wi-Fi reception
– the network name
– the IP address
Set up again
(visible if set up)
Resets the Wi-Fi login (network) to
immediately re-establish a new
connection.
Reset
(visible if set up)
– The Wi-Fi is switched off.
– The Wi-Fi connection will be reset to
the factory setting.
The network configuration should be
reset whenever a washing machine is
being disposed of or sold, or if a used
washing machine is being put into
operation. This is the only way to
ensure that you have removed all
personal data and the previous owner
can no longer access the washing
machine.
A new connection setup has to be
carried out in order to use the
Miele@home setting again.
