Before using for the first time
20
3. Removing the transit bars
Damage resulting from failure to
remove the transit bars.
Failure to remove the transit bars can
result in damage to the washing
machine and to adjacent cabinetry or
appliances.
Remove the transit bars as described
in “Installation”.
The following message appears in the
display:
Remove transit bars
Confirm with the
OK
sensor.
4. Commissioning TwinDos
The UltraPhase 1 and UltraPhase 2
values are preset in the standard
settings and only need to be confirmed.
The following message appears in the
display:
TwinDos
Confirm with the
OK
sensor.
The following message appears in the
display:
Set now
To set up TwinDos now, touch the
OK
sensor.
To postpone setup until later, touch
the
sensor until the following
appears in the display:
Set later
and
press
OK
to confirm.
Settings for compartment
The UltraPhase 1 values are preset in
the standard settings.
Agent for
OK
Confirm with the
OK
sensor.
Miele UltraPhase 1
OK
Confirm with the
OK
sensor.
The following appears in the display:
Set the dosage. Observe water hardness
level
Confirm with the
OK
sensor.
The dispensing quantity for
UltraPhase 1 for
(hardness range I)
is preset.
Per load
OK
ml
46
Confirm the preset value with the
OK sensor. If you want to change this
value, use the
sensors and
confirm with the
OK
sensor.
UltraPhase 1
Hardness level I
46 ml
Hardness level II
58 ml
Hardness level III
70 ml
