Miele WWI 860 Operating Instructions Manual Download Page 94

Page: 94 / 108

Settings

You can use the settings to alter the
machine's electronics to suit changing
requirements.

Settings can be altered at any time.

Calling up settings



Turn the programme selector to the

Further programmes



position.

Outerwear











Touch the



sensors until the

following appears in the display:

Settings 











Confirm with the

sensor.

Language 









You are now in the

Settings

submenu.

Selecting settings



Touch the



sensors until the

setting you want appears in the
display.

– The



sensor scrolls down the list.

– The



sensor scrolls up the list.



Touch the

sensor to select the

setting displayed.

Changing a setting



Touching the



sensors will call up

the different options for the setting.

The option that is selected will have a
tick



next to it.



Touch the

sensor to activate the

required option in the display.

Closing the settings menu



Turn the programme selector.

Summary of Contents for WWI 860













































































































Search results

Summary of Contents for WWI 860

Reviews:

Related manuals for WWI 860

Brands by name

Popular brands

Miele WWI 860, Operating Instructions Manual

Search results

Summary of Contents for WWI 860

Reviews:

Related manuals for WWI 860

Brands by name

Popular brands