Before using for the first time
22
Settings for compartment
The UltraPhase 2 values are preset in
the standard settings.
After the UltraPhase 1 cartridge has
been pushed in, the display message
switches to:
Agent for
OK
Confirm with the
OK
sensor.
Miele UltraPhase 2
OK
Confirm with the
OK
sensor.
The dispensing quantity for
UltraPhase 2 for
(hardness range I)
is preset.
Per load
OK
ml
36
Confirm the preset value with the
OK sensor. If you want to change this
value, use the
sensors and
confirm with the
OK
sensor.
UltraPhase 2
Hardness level I
36 ml
Hardness level II
45 ml
Hardness level III
54 ml
The following appears in the display:
Insert
Remove the foil from the detergent
cartridge.
Push the
UltraPhase 2
detergent
cartridge into
compartment 2
until it
locks into position.
When the cartridge is pushed in, the
display message switches to:
"TwinDos" is set. Can be changed in
'Settings'
Confirm with the
OK
sensor.
Close the TwinDos access panel.
