Miele PW 5082 Operating And Installation Instructions Download Page 64 | Manualshive

Page: 64 / 68

background image

Memory

If an extra option has been selected
for a programme, or the
recommended temperature or spin
speed has been altered, the machine
will store the changes in memory at
the start of the programme.

When this programme is chosen again
these settings will appear in the
display.

The machine is delivered with the
memory function deactivated.

Auto load control

If the Auto load control is
deactivated, the machine will always
carry out the programme sequence
based on a full load.

The machine is delivered with this
option activated.

Pre-wash water

You can choose for the pre-wash to
be carried out with either hot or cold
water. Hot water can only be taken in
if the wash temperature is above
30°C.

The machine is delivered with the

Hot

water option selected.

Main wash water

You can choose for the main wash to
be carried out with either hot or cold
water. Hot water can only be taken in
if the wash temperature is above
30°C.

The machine is delivered with the

Hot

water option selected.

If the machine is not connected to a
hot water supply, programme
durations will be longer.

Rinse water

You an choose for the final rinse to
be carried out with either hot or cold
water. Hot water can only be used if
the wash temperature is above 50°C.

The machine is delivered with the

Cold

water option selected.

Settings/Supervisor level menu

64

«
...
62
63
64
65
66
...
»

Summary of Contents for PW 5082





































































Reviews:

No comments

Related manuals for PW 5082

Brand: Lavorwash Pages: 28

Brand: Omega Pages: 6

Brand: GE Pages: 28

Brand: Generac Power Systems Pages: 24

Brand: ZANKER Pages: 24

Brand: Hotpoint Pages: 16

Brand: Smeg Pages: 14

Brand: Ardo Pages: 36

Brand: DeLonghi Pages: 68

Brand: Hoover Pages: 88

Brand: Bush Pages: 38

WW80H5290E Series

Brand: Samsung Pages: 88

Brand: Samsung Pages: 112

Brand: Samsung Pages: 120

Brand: Samsung Pages: 336

Brand: Samsung Pages: 960

Brand: Samsung Pages: 52

Brand: inventum Pages: 88

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands