Connection to the hot water supply
To keep electricity consumption costs
down this machine can be connected
to a
(ring) piped hot water supply
.
The maximum water temperature at the
stopcock must not exceed 70°C. It is
not economical to run it from an
individual hot water supply if it is not in
continuous use, as the water in the
supply pipes cools down and more
energy would be required to reheat the
water. For hot water connection the
same conditions apply as for cold water
connection.
The inlet hose with the red stripes (hot
water hose) is connected to the
stopcock.
For operational reasons the machine
must not be connected to hot water
only.
If the machine is
not
connected to a hot
water supply, the hot water inlet hose
must be disconnected and water
settings for the
main wash
,
pre-wash
and
rinses
must be reprogrammed.
^
Select the
Cold
option in the
Settings
/
Supervisor level
menu.
The programme durations may be
longer.
^
Disconnect the hot water hose (red
stripes).
^
Plug the inlet connection with the
blanking cap supplied.
Connection to a very hot water
supply
It is possible to connect the machine to
a hot water supply, 70°C to a maximum
of 85°C. A special inlet hose is required
for this option. The machine must also
be reprogrammed by a Miele service
technician.
Installation
54
Summary of Contents for PW 5082
Page 58: ...58 ...
Page 68: ...Alteration rights reserved 1313 M Nr 09 146 142 00 ...
