Miele PW 5082 Operating And Installation Instructions Download Page 26

Page: 26 / 68

Cottons

30°C to 95°C

Max. load 8.0 kg

Use for

Cotton and linen fabric, e.g. bed linen, table linen, towelling,
jeans, underwear, T-shirts, nappies.

Notes

– Only use Cottons 95°C for very heavily soiled laundry.

– For dark coloured fabrics use a detergent for coloured

fabrics, or liquid detergent.

Detergent

Universal detergent or detergent for coloured fabrics

Extra options

Pre-wash

Minimum iron

30°C to 60°C

Max. load 4.0 kg

Use for

Garments made of synthetic fibre, mixed fibre and for easy
care cotton shirts, blouses and table linens.

Detergent

Universal detergent and detergent for coloured fabrics

Extra options

Pre-wash

Intensive wash*

40°C to 60°C

Max. load 8.0 kg

Use for

Heavily soiled cotton, linen and mixed fibre fabrics.

Additional
option

Pre-wash

Detergent

Universal detergent or detergent for coloured fabrics

Note for test institutes: Standard programme in accordance with EN 60456

*To carry out a wash on the standard programme in accordance with EN 60456,
the

Intensive wash

programme must be selected.

Programme chart

Summary of Contents for PW 5082





































































Search results

Summary of Contents for PW 5082

Reviews:

Related manuals for PW 5082

Brands by name

Popular brands

Miele PW 5082, Operating And Installation Instructions

Search results

Summary of Contents for PW 5082

Reviews:

Related manuals for PW 5082

Brands by name

Popular brands