Low water pressure
This setting should be activated to
ensure the correct amount of water is
taken into the machine in areas where
the water pressure is constantly low
(below 100 kPa/14.5 psi).
The machine is delivered with the Low
water pressure option deactivated.
Empty sensor
You can activate the
Empty sensor
option for the external liquid
detergent containers so that a
message appears in the display
when a container is empty.
The factory default setting is
No
(no
empty sensor).
Cottons level
You can increase the water level for
the main wash in the
Cottons
programme.
The machine is delivered with the Block
parameters option selected (the water
level will be controlled according to the
programme data which has been
programmed on-site).
Minimum iron level
You can increase the water level for
the main wash in the
Minimum iron
programme.
The machine is delivered with the Block
parameters option selected (the water
level will be controlled according to the
programme data which has been
programmed on-site).
Pre-wash temp. cottons
You can select the temperature for
the pre-wash in the
Cottons
programme.
The machine is delivered with the Block
parameters option selected (the
temperature will be controlled
according to the programme data
which has been programmed on-site).
Pre-wash duration
You can lengthen the duration of the
pre-wash.
The machine is delivered with the Block
parameters option selected (the wash
duration will be controlled according to
the programme data which has been
programmed on-site).
Settings/Supervisor level menu
65
Summary of Contents for PW 5082
Page 58: ...58 ...
Page 68: ...Alteration rights reserved 1313 M Nr 09 146 142 00 ...
