Miele PW 5082 Operating And Installation Instructions Download Page 27

Page: 27 / 68

Delicates

20°C to 40°C

Max. load 3.0 kg

Use for

Delicate garments made of synthetic fibre, mixed fibre and easy
care cotton shirts and blouses.
Curtains, including net curtains, specified as machine-washable
by the manufacturer.

Notes

– Use the woollens programme for any textiles which contain

wool.

– Dust in curtains usually makes using a programme with

Pre-wash

advisable.

– For curtains which crease easily, reduce the spin speed or

deselect the spin.

Detergent

Liquid detergent for delicates

Extra options

Pre-wash

Woollens

20°C to 30°C

Max. load 3.0 kg

Use for

Machine-washable or hand-washable wool or wool blend fabric.
If the care label does not specify a temperature wash using the
cold setting.

Detergent

Liquid detergent for machine-washable woollens

Mini Quick wash

40°C

Max. load 4.0 kg

Use for

Very lightly soiled fabric which can be washed in a

Cottons

programme.

Note

Use less detergent (as for a half load).

Detergent

Universal detergent and detergent for coloured fabrics

Extra rinse

Max. load 8.0 kg

Use for

Articles which have been washed by hand and only need to be
rinsed and spun in the machine.

Drain / Spin

Max. load 8.0 kg

Notes

Drain only: Select

Without spin

For spinning fabrics. Please make sure you select the
appropriate spin speed.

Programme chart

Summary of Contents for PW 5082





































































Search results

Summary of Contents for PW 5082

Reviews:

Related manuals for PW 5082

Brands by name

Popular brands

Miele PW 5082, Operating And Installation Instructions

Search results

Summary of Contents for PW 5082

Reviews:

Related manuals for PW 5082

Brands by name

Popular brands