Miele PW 5082 Operating And Installation Instructions Download Page 67

Page: 67 / 68

No. rinses Minimum iron

You can alter the number of rinses
which are carried out in the

Minimum

iron

programme.

2 rinses (factory default setting)
3 rinses
4 rinses

Pre-rinse Cottons

A pre-rinse can be carried out in the

Cottons

programme.

The machine is delivered with this
option deactivated.

Pre-rinse Minimum iron

A pre-rinse can be carried out in the

Minimum iron

programme.

The machine is delivered with this
option deactivated.

Spin free of charge

If your machine is fitted with a
payment system, you can release the
Spin programme (paid).

The machine is delivered with this
option deactivated.

To close the Settings menu

Select

Back

and confirm your

selection. The display will return to
the entry menu.

Settings/Supervisor level menu

Summary of Contents for PW 5082





































































Search results

Summary of Contents for PW 5082

Reviews:

Related manuals for PW 5082

Brands by name

Popular brands

Miele PW 5082, Operating And Installation Instructions

Search results

Summary of Contents for PW 5082

Reviews:

Related manuals for PW 5082

Brands by name

Popular brands