Miele Oven Operating And Installation Instructions Download Page 91

Page: 91 / 148

Residual heat use

The heating in the oven switches off
shortly before the end of the cooking
programme. The residual heat in the
oven is sufficient to complete the
cooking process.

Using the residual heat in the oven
saves energy.

"Energy save phase" will appear in the
display to show that the oven is in
energy save mode. The measured core
temperature is no longer visible.

The cooling fan continues to run, as
does the hot air fan if a "fan" setting has
been chosen.

When the core temperature selected
has been reached,

– "Process finished" appears in the

display,

– a buzzer will sound if the buzzer is

switched on (see "Settings - Volume -
Buzzer tones"),

If the food is not yet cooked sufficiently,
insert the food probe into another place
and repeat the programme.

Roasting

Summary of Contents for Oven





















































































































































Search results

Summary of Contents for Oven

Reviews:

Related manuals for Oven

Brands by name

Popular brands

Miele Oven, Operating And Installation Instructions

Search results

Summary of Contents for Oven

Reviews:

Related manuals for Oven

Brands by name

Popular brands