Miele Oven Operating And Installation Instructions Download Page 48

Page: 48 / 148

Using the

sensor you can set a

minute minder duration to time any
activity in the kitchen, e.g. boiling eggs,
or an alarm for a specific time.

Two alarms can be set
simultaneously, two minute minder
durations or an alarm and a minute
minder duration.

Using the alarm

The alarm can be used to set a specific
time at which a buzzer will sound on the
oven.

Setting the alarm

If "Time – Display – Off" has been
selected, you will need to switch the
oven on before you can set the
alarm. The time for the alarm will now
appear in the display when the oven
is switched off.

Touch

Touch "New alarm".

Set the time for the alarm.

Touch "OK".

When the oven is switched off, the
alarm time and

will appear in the

display instead of the time of day.

If you are cooking at the same time or if
you are in a different menu, the alarm
time and

will appear in the top right

hand side of the display.

Minute Alarm

Summary of Contents for Oven





















































































































































Search results

Summary of Contents for Oven

Reviews:

Related manuals for Oven

Brands by name

Popular brands

Miele Oven, Operating And Installation Instructions

Search results

Summary of Contents for Oven

Reviews:

Related manuals for Oven

Brands by name

Popular brands