Miele Oven Operating And Installation Instructions Download Page 51

Page: 51 / 148

At the end of the minute minder time

– a buzzer will sound if the buzzer

volume has been set (see "Settings -
Volume - Buzzer tones").

–

will flash and the display will show

the time counting up.

Touch

or the minute minder time in

the top right hand side of the display.

The buzzer will stop and the symbols in
the display will go out.

To change the time set for the minute
minder

Touch the minute minder time in the
top right hand side of the display or
touch

and select the relevant

minute minder time.

The minute minder time selected
appears.

Set the new minute minder time you
require.

Touch "OK".

The changed minute minder is saved
and will count down in seconds.

To cancel the time set for the minute
minder

Touch the minute minder time in the
top right hand side of the display or
touch

and select the relevant

minute minder time.

The minute minder time selected
appears.

Touch "Reset".

Touch "OK".

The minute minder is now cancelled.

Minute Alarm

Summary of Contents for Oven





















































































































































Search results

Summary of Contents for Oven

Reviews:

Related manuals for Oven

Brands by name

Popular brands

Miele Oven, Operating And Installation Instructions

Search results

Summary of Contents for Oven

Reviews:

Related manuals for Oven

Brands by name

Popular brands