Miele Oven Operating And Installation Instructions Download Page 138

Page: 138 / 148

After sales service

In the event of any faults which you
cannot remedy yourself, or if the
appliance is under guarantee, please
contact

– your Miele Dealer

– The Miele service department.

See back of manual for contact
details.

When contacting your Dealer or Miele,
please quote the model and serial
number of your appliance.

This information is given on the data
plate, visible on the front frame of the
oven, with the door fully open.

Please note that telephone calls may
be monitored and recorded for
training purposes.

N.B. A call-out charge will be applied to
service visits where the problem could
have been resolved as described in
these instructions.

Guarantee

For further information on the appliance
guarantee specific to your country
please contact Miele. See back cover
for contact details.

This appliance is guaranteed for 2
years from the date of purchase.
In the UK you must activate your cover
by calling 0845 365 6640 or registering
online at www.miele.co.uk.

After Sales / Guarantee

138

Summary of Contents for Oven





















































































































































Search results

Summary of Contents for Oven

Reviews:

Related manuals for Oven

Brands by name

Popular brands

Miele Oven, Operating And Installation Instructions

Search results

Summary of Contents for Oven

Reviews:

Related manuals for Oven

Brands by name

Popular brands