Miele Oven Operating And Installation Instructions Download Page 117

Page: 117 / 148

If the Pyrolytic cleaning programme
is cancelled

If the Pyrolytic cleaning programme
is cancelled the oven door will remain
locked until the temperature inside
the oven drops to below 280 °C.

The following will cause the Pyrolytic
cleaning programme to stop:

– Switching the oven off.

"Switch appliance off?" will appear in
the display.

Touch "Yes" if you want to cancel the
Pyrolytic cleaning programme.

The door will unlock once the
temperature in the oven has dropped
below 280 °C and the oven is
switched off.

Touch "No" if you want to continue
running the Pyrolytic cleaning
programme.

The Pyrolytic cleaning programme
will continue running.

– A power cut.

"Process cancelled" will appear in
the display if there is a power cut.

The door will unlock once the
temperature inside the oven is below
280 °C.

A buzzer will sound if the buzzer is
switched on (see "Settings - Volume -
Buzzer tones"),

"Process finished" will appear in the
display.

Touch

Start the Pyrolytic cleaning
programme again.

Cleaning and care

117

Summary of Contents for Oven





















































































































































Search results

Summary of Contents for Oven

Reviews:

Related manuals for Oven

Brands by name

Popular brands

Miele Oven, Operating And Installation Instructions

Search results

Summary of Contents for Oven

Reviews:

Related manuals for Oven

Brands by name

Popular brands