Miele Oven Operating And Installation Instructions Download Page 44

Page: 44 / 148

Volume

Buzzer tones

The volume setting is represented by a
bar with seven segments.

P P P P G G GM

Use the segment bar to alter the
volume.
Select "On" or "Off" to switch the
buzzer tones on or off.

Maximum volume is selected when all
segments are filled.
If none of the segments are filled the
volume is switched off.

Keypad tone

The keypad volume is represented by a
bar with seven segments.

P P P P G G GM

Use the segment bar to alter the
volume.
Select "On" or "Off" to switch the
keypad tone on or off.

Maximum volume is selected when all
segments are filled.
If none of the segments are filled the
volume is switched off.

Welcome melody

You can switch the welcome melody on
or off.

Units

Weight

– g

Weight in Automatic programmes is
set using grammes.

– lb/oz

Weight in Automatic programmes is
set using pounds and ounces.

Temperature

– °C

The temperature is displayed in
degrees Celsius.

– °F

The temperature is displayed in
degrees Fahrenheit.

Settings

Summary of Contents for Oven





















































































































































Search results

Summary of Contents for Oven

Reviews:

Related manuals for Oven

Brands by name

Popular brands

Miele Oven, Operating And Installation Instructions

Search results

Summary of Contents for Oven

Reviews:

Related manuals for Oven

Brands by name

Popular brands