Miele Oven Operating And Installation Instructions Download Page 76

Page: 76 / 148

– Display cooking stages

A summary of your settings will
appear in the display. You can alter
the settings via "Change" (see "To
change User programmes").

Touch the function you want.

Confirm the message regarding
which shelf level to use with "OK".

The programme will start according to
the specified start or finish time.

To change User programmes

Change cooking stages

Cooking stages in an Automatic
programme that you have renamed
as a User programme cannot be
changed.

Touch User programmes

The programme names will appear in
the display.

Select "Process".

Select "Change programme".

Touch the programme you want.

Touch "Change cooking stages".

You can change the specified settings
for a cooking stage or add more
cooking stages to the programme.

Touch the cooking stage you want to
change or "Add cooking stage".

Change the programme as you wish
(see "To create a User programme").

Check the settings and then confirm
them with "OK".

Select "Save".

Change the name if necessary (see
"To create a User programme") and
touch "Save".

The changes to your programme will be
saved.

User programmes

Summary of Contents for Oven





















































































































































Search results

Summary of Contents for Oven

Reviews:

Related manuals for Oven

Brands by name

Popular brands

Miele Oven, Operating And Installation Instructions

Search results

Summary of Contents for Oven

Reviews:

Related manuals for Oven

Brands by name

Popular brands