manualshive.com logo in svg

Miele H6860BP, Operating And Installation Instructions

Share
Download
Miele H6860BP Operating And Installation Instructions Download Page 18

Warning and Safety instructions

18

Accessories

 

Use only genuine original Miele spare parts. If spare parts or

accessories from other manufacturers are used, the warranty will be
invalidated, and Miele cannot accept liability.

 

If you have a Miele HUB 5000-M/HUB 5001-M/HUB 5000-XL/

HUB 5001-XL (if available) oven dish, do not place it on shelf level 1.
This would damage the floor of the oven. The very small gap
between the bottom of the dish and the oven floor would cause a
build-up of heat and could cause the enamel to crack or chip.
Do not place Miele oven dishes on the top rail of shelf level 1 as they
will not be secured in this position by the anti-tip safety notches on
the sides of the dishes.
Instead, use shelf level 2 for these oven dishes.

 

Only use the Miele food probe supplied with this oven. If it is

faulty, it must only be replaced with a suitable original Miele food
probe.

 

The plastic on the food probe can melt at very high temperatures.

Do not use the food probe when grilling (Exception: Fan Grill 

). If

you are not using the food probe, do not store it in the oven.

 

The high temperatures used during the Pyrolytic cleaning

programme will damage accessories that are not designed for
cleaning in the Pyrolytic programme. Please remove these
accessories from the oven interior before starting the Pyrolytic
cleaning programme. This also applies to non-pyrolytic accessories
purchased separately to the oven (see "Cleaning and care").

Summary of Contents for H6860BP





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands