manualshive.com logo in svg

Miele H6860BP, Operating And Installation Instructions

Share
Download
Miele H6860BP Operating And Installation Instructions Download Page 143

Problem solving guide

143

Problem

Possible cause and remedy

The top oven lighting
does not switch on.

The halogen lamp needs replacing.

Danger of burning!

Make sure the oven heating elements are switched
off and that the oven cavity is cool.

Disconnect the appliance from the mains. Switch
off at the wall and withdraw the plug from the
socket, or switch off at the mains circuit breaker.

Turn the lamp cover a quarter turn anti-clockwise
to release it and then pull it together with its seal
downwards to take it out.

Replace it with a new halogen lamp
(Osram 66725 AM/A, 230 V, 25 W, G9).

Refit the lamp cover together with its seal and turn
clockwise to secure.

Reconnect the oven to the electricity supply.

The side oven lighting
does not switch on.

The halogen lamp needs replacing.

Danger of burning!

Make sure the oven heating elements are switched
off and that the oven cavity is cool.

Disconnect the appliance from the mains. Switch
off at the wall and withdraw the plug from the
socket, or switch off at the mains circuit breaker.

Remove the shelf runners.

Release the lamp cover from its holder using the
tool supplied.

Replace it with a new halogen lamp
(Osram 66725 AM/A, 230 V, 25 W, G9).

Press the lamp cover back into its retainer and refit
the shelf runners.

Reconnect the oven to the electricity supply.

Summary of Contents for H6860BP





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands