Miele H6860BP Operating And Installation Instructions Download Page 125

Page: 125 / 156

Cleaning and care

125

The Pyrolytic cleaning programme is
cancelled

If the Pyrolytic cleaning programme is
cancelled, the oven door will remain
locked until the temperature inside the
oven drops to below 280 °C.

The following will cause the Pyrolytic
cleaning programme to stop:

– Switching the oven off.

– A power cut.

If you turn the oven off,

Switch appliance

off?

will appear in the display.



Select "

Yes

if you want to cancel the

Pyrolytic cleaning programme.

The door will unlock once the
temperature in the oven has dropped
below 280 °C and the oven is switched
off.



Select

if you want to continue

running the Pyrolytic cleaning
programme.

The Pyrolytic cleaning programme will
continue running.

If there has been a power cut,

Process

cancelled. Cooling down

will appear in the

display once power is restored.

The door will unlock once the
temperature in the oven has dropped
below 280 °C and the oven is switched
off.

A buzzer will sound if the buzzer is
switched on (see "Settings - Volume -
Buzzer tones").

Process finished

appears in the display.



Select





Start the Pyrolytic cleaning
programme again.

Summary of Contents for H6860BP





























































































































































Search results

Summary of Contents for H6860BP

Reviews:

Related manuals for H6860BP

Brands by name

Popular brands

Miele H6860BP, Operating And Installation Instructions

Search results

Summary of Contents for H6860BP

Reviews:

Related manuals for H6860BP

Brands by name

Popular brands