Microtek ScanMaker 5, User Manual

Page: 12 / 68

Getting Started 2-3
English
Exiting ScanWizard Pro
To exit from ScanWizard Pro, go to the Preview window, and click on the Close button
at top-right corner of the window.
" Close " button
Click to quit from
ScanWizard Pro
Color Matching
The first time you launch ScanWizard Pro, you will be prompted to perform color
matching for your monitor and printer.
Color Matching is an important feature of ScanWizard Pro that ensures color
consistency — from the initial input phase when an image is captured by the scanner,
to the final output process when the image is output to your monitor or printer. Color
Matching allows you to gain the assurance that the colors captured by the scanner
are consistent with those displayed on your monitor and will be reproduced as
closely as possible when they are printed.
You will be prompted with a dialog box (below) to select color matching settings
immediately after you launch ScanWizard Pro the first time.
You may redefine color matching settings whenever required. To do this, go to the
Preferences menu in the Preview window, and choose the Color Matching Setup
command.
For more detailed information on color matching, see Color Matching for Advanced
Users in the Appendix section of this manual.
This is dimmed
when
operating under
LCH mode
Monitor selection
shown here is set at
default profiles for
monitor and printer
CMYK printer
profile. No default
provided. Must
select one if required