ArtixScan DI 5230/5240/5250/5260 & ArtixScan TS 540T User's Manual 29
Image
correction
settings
Image
type
Scanning
settings
For preview
purposes only
Scan frame
(enclosed by
dotted lines and
labeled with the
tag “Main”)
Preview window
Preview image
(the enclosed
frame bordered
in red)
For preview purposes only, take note of the additional notes below:
1. Load a piece of paper from the paper stack into the ADF’s Document Feed
Tray as step 1. Do not load more than one sheet, as a single sheet is
sufficient for previewing.
2. After finishing step 3 and before proceeding to step 4, click the
Preview
button to perform a preliminary view of the entire image. When done, a
preview image appears in the preview window.
At this moment, the previewed page is delivered to the document tray from the
ADF's Document Feed tray. Load the previewed page, along with the paper
stack, on the ADF's Document Feed Tray. You are now ready to scan.
–
If ScanWizard DI is launched as a plug-in from an image-editing program,
the scanned image is delivered after the scan to your application, where
the image can be saved, printed, or modified further.
–
If ScanWizard DI is launched as a stand-alone program, the scanned
image can be saved after the scan to a file, or opened in an image-editing
program.
