ArtixScan DI 5230/5240/5250/5260 & ArtixScan TS 540T User's Manual 25
Scanning Documents
Microtek only demos the use of the ScanWizard DI (PC) in succeeding pages in
this guide. For more details about using the ScanPotter (Mac) to scan your
documents, please refer to the
ScanPotter Reference Manual
in the Microtek
software CD/DVD.
Using ScanWizard DI
ScanWizard DI is a scanning software designed by Microtek for document
scanning in color, black and white, and grayscale in both duplex and simplex
modes. Its user-friendly interface enables you to easily start the scanning process.
Refer to the ScanWizard DI software manual for more details.
Warning
:
•
Do not place photos or fragile materials in the feed tray, for it will damage
the originals when performing the feeding process. Always place frail
originals on the scanner's glass surface and choose “Flatbed” as your
Scan Source.
•
Before scanning the document from the ADF, make sure the flatbed
scanning area is clear from any obstructions. Otherwise, a scanning error
may occur.
•
Before using the ScanWizard DI, make sure that your anti-virus software
program has been turned off. Otherwise, the scanning speed may be
affected.
The following sections will show you step by step how to use ScanWizard DI.
Scanning a Single-sheet Document
1. Place the single-sheet document to be scanned either on the scanner glass
surface or into the ADF’s Document Feed Tray.
2. Launch ScanWizard DI
(either as a stand-alone by clicking the program icon,
or by using the “File-Import” or “Scan” command from an application
program).
3. Specify your scanning requirements in the ScanWizard DI control panel.
a) Select your image input device in the Scan Source drop-down menu.
–
Select
Flatbed
if you place the document on the scanner’s glass
surface.
