Microscan NL-200, User Manual

Page: 49 / 51

NL-200 Series Controller User’s Manual
E-1
E. Event Codes
Event messages are sent when a light is connected or an error occurs. The format of these is
Evt<channel>,<event code>;
These event messages are only sent after the GT1 command has been sent.
Event number Reason
1 to 127 An error has occurred. The error code is given by the event number.
128 A light has been connected and is working.
129 A light has been connected but doesn’t have a current or voltage rating.
130 Over temperature error occurred ( FAT)
131 Over current error occurred (FAC)
132 An error has occurred while autosensing the rating of a light.