Microscan NL-200, User Manual

Page: 40 / 51

11-6
NL-200 Series Controller User’s Manual
Command Configuration
(NL-220, NL-220F , NL-820F)
11.2.2 Command Summary
Command Example Effect
AW AW Save changes
GT GT1 Enable Ethernet messages
GR GR Clear any error condition.
EY EY65,66 Set webpage password to “AB”
VR VR Read the firmware version
VL VL1,0,0.5 Set the rating of channel 1 to 0.5A
RS RS2,65 Set channel 2 to 65% brightness continuous
RW RW1,50 Set channel 1 to 50%, switch mode
RU RU1,75,25 Set channel 1 to selected mode at 75% and 25%
RT NL2,3,4,50 Set channel 2 to 3ms pulses, delayed by 4ms, at 50% brightness
RP RP1,2 Output channel 1 is triggered using input 2
RE RE1,3 Set channel 1 to ignore lighting errors and not prompt for the
current rating of a light when it is connected
TT TT1,1ms Set internal triggers every 1ms
KB KB1,23 Disable the buttons on the front panel. Set the unlock code to 23.
TR TR2 Trigger channel 2
NOTE: If the above commands are executed using the Web Page feature, they will not be executed
in the command entry area of the Web Page.