Microscan NL-200, User Manual

Page: 12 / 51

5-2
NL-200 Series Controller User’s Manual
Connections
Pin LED12 LED34 LED56 LED78
1 CH1 lighting CH3 lighting CH5 lighting CH7 lighting
out +ve out +ve out +ve out +ve
2 CH1 lighting CH3 lighting CH5 lighting CH7 lighting
out -ve out -ve out -ve out -ve
3 CH2 lighting CH4 lighting CH6 lighting CH8 lighting
out +ve out +ve out +ve out +ve
4 CH2 lighting CH4 lighting CH6 lighting CH8 lighting
out -ve out -ve out -ve out -ve
5.3 Trigger Inputs
There is one trigger input per channel. Connectors ET34, ET56, ET78 are only fitted on the NL8xx
models.
The trigger inputs are opto-isolated 3V to 24V input, drawing a minimum of 3mA.
Pin ET12 connector ET34 connector ET56 connector ET78 connector
1 TRIG1 -ve TRIG3 -ve TRIG5 -ve TRIG7 -ve
2 TRIG1 +ve TRIG3 +ve TRIG5 +ve TRIG7 +ve
3 TRIG2 -ve TRIG4 -ve TRIG6 -ve TRIG8 -ve
4 TRIG2 +ve TRIG4 +ve TRIG6 +ve TRIG8 +ve
5.4 12V Power Output
One or two 12V power supply outputs may be present. These can supply up to 1A at 12V for power-
ing external cameras and other devices. Do not connect inductive loads or devices that take large
peak currents. Do not exceed the current rating as these outputs are not fused.
Pin PW1 connector PW2 connector
1 GND GND
2 +12V +12V
5.4.1 Ethernet Connection (NL220, NL820F, NL-220F)
The RJ45 Ethernet connector requires a straight through cable to connect into a network switch, hub
or router. It runs at 10Mbits per second.