Microscan EZ Match, User Manual

Page: 86 / 431

4-18
EZ Match User’s Manual
Daisy Chain ID Status
Note: Enable/disable and length must be the same in all readers.
Daisy Chain ID
Important: The ASCII characters < , > , and
,
can only be entered as hex pairs:
For < : <K101h,,,,,,,3C>
For > : <K101h,,,,,,,3E>
For
,
: <K101h,,,,,,,2C>
See ASCII Character Entry Modifier on page 4-33 for a detailed explanation of how to
enter ASCII characters as hex values.
Usage: Used in a daisy chain setup in cases where the host needs to know which
reader in the chain sent the data.
Definition: Each reader in a daisy chain can be assigned a one or two character ID
that will appear in front of decoded data and identify its source.
Serial Cmd: < K101, aux port mode,baud rate,parity,stop bits,data bits, daisy chain i.d.
status , daisy chain i.d. >
Default: Disabled
Options: 0 = Disabled 1 = Enabled
Usage: Used in a daisy chain setup in cases where the host needs to know which
reader in the chain sent the data.
Definition:
A one or two character prefix which identifies the particular daisy chain
reader from which the data is being sent to the host.
Serial Cmd:
< K101, aux port mode,baud rate,parity,stop bits,data bits,daisy chain i.d.
status, daisy chain i.d. >
Default: 1/
Options: Any one or two ASCII characters.