Microscan EZ Match, User Manual

Page: 187 / 431

EZ Match User’s Manual
8-3
I/O Parameters
I/O Parameters Serial Commands
Power On/Reset Counts
< K406, power-on,resets,power-on saves,power-on flash saves,
power-on tube/cap library saves >
Time Since Reset < K407, hours,minutes >
Service Message < K409, status,service message,threshold,resolution >
Serial Verification
< K701, serial command echo status,serial command beep status,
control/hex output >
Beeper < K702, status >
Quality Output < K704, quality output separator,decodes/trigger status >
Symbol Data Output < K705, symbol data output status,when to output >
Read Duration Output < K706, status,separator >
No Read Message < K714, status,message >
Bad Symbol Message < K715, [unused],message >
No Symbol Message < K716, [unused],message >
1D/Stacked Symbology Qualification
< K717, minimum number of bars,minimum number of qualified
scan lines,start/stop status >
2D Symbology Qualification
< K718, finder pattern status,symbol size status,symbol size 1,
symbol size 2,symbol size tolerance,dimension status,dimension
1,dimension 2,dimension tolerance,orientation status,orientation
value
>
Frame Information < K734, output frame number,output coordinates >
LED Configuration < K737, LED mode,ISO/IEC 16022 grade >
Image Output
< K739, image output mode,communication port,file format,JPEG
quality >
Target/Flood LEDs
< K750, green flash LED status,target pattern LED status,green
flash duration >
EZ Trax Output
< K757, status,comm port,image mode,image format, JPEG quality,
object info output,grade output,color >
Database Identifier Output < K759, status,separator >
EZ Button
< K770, global status,default on power-on,load IP database,save for
power-on >
EZ Button Modes < K771, single beep,two beeps,three beeps,four beeps >
Trend Analysis Output 1
< K780, trend analysis mode,number of triggers,number to output
on,decodes/trigger threshold >
Trend Analysis Output 2
< K781, trend analysis mode,number of triggers,number to output
on,decodes/trigger threshold >
Trend Analysis Output 3
< K782, trend analysis mode,number of triggers,number to output
on,decodes/trigger threshold >
Diagnostics Output 1 < K790, unused 1,service unit >
Diagnostics Output 2 < K791, unused 1,service unit >
Diagnostics Output 3 < K792, unused 1,service unit >
ISO/IEC 16022 Symbol Quality Output 1
< K800, output on symbol contrast,symbol contrast threshold,output
on print growth,print growth threshold,output on axial non-uniformity,
axial non-uniformity threshold,output on unused ECC,unused ECC
threshold
>