76 Panel Functions
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual logiJET TM4
Edition 1.2p
8.3.2. Adjusting the Sync Sensors
Please note:
Always
adjust
the printer
sensors
to your consumables (
sensor
position as well as the levels and currents
).
8.3.2.1. Checking and Adjusting the Sensors
The device is provided with sensors to enable controlling of consumable
movements (Synchronization).
The Black mark sensor (Reflex sensor) is located “below” the printhead
mounting, the Gap sensor (Transparent sensor) is additionally located in the
printhead holder, too (fixed position, centric).
Adjust the sensors to
your consumables:
Please note:
The sensors are located under the print unit.
Always adjust all sensors to your current consumables (levels and currents
as well as sensor position).
1.
Open the printer cover completely.
2.
Push the both printhead release levers to open the printhead
mechanism.
