44 Operation
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual logiJET TM4
Edition 1.2p
5.2. Printer Power Supply
Please notice the instructions given in chapter 4 Handling of
Consumables.
1.
Make sure that the printer is turned off. The power switches are located at
the back of the printer (next to the paper input opening of the printer, see
figure 5.1a).
2.
Connecting the Printer to the Power Supply
Either
Connecting the Mains Voltage
2a. Plug one end of the printer power cord into the socket at the back of
the printer and the other end into a properly grounded outlet.
2b. Turn on the printer. The power switch is located at the back side of the
printer (at the lower right corner of the printer, see fig. 5.1a).
or
Connecting to the electric system of the Forklift Truck (Option)
2a. Demount the side cover (located next to the cover of the printer).
Fig. 5.2.a Rear view of the printer: Position of the side cover
Demount the
Side cover
(2 Screws)
